Short notes from all three areas: what we have built and arranged, and what proves itself in occupational safety. The same posts appear on our LinkedIn page.
Bei einem Kälte- oder Klimaprojekt entscheidet die Abstimmung zwischen den Gewerken oft darüber, wie zuverlässig und wie effizient die Anlage später läuft.
Lüftung, Elektrik, Wasserkreisläufe, Brandschutz, Steuerung und Genehmigungen lassen sich nicht unabhängig voneinander betrachten. Schwierigkeiten entstehen meist an den Übergängen. Informationen fehlen, Zuständigkeiten sind unklar oder eine Änderung wirkt sich gleich auf mehrere Gewerke aus.
Gemeinsam mit Heidinger begleiten wir Kälteprojekte deshalb durchgängig. Von der Aufnahme der Anforderungen über Planung und Auslegung bis zu Montage, Inbetriebnahme und Einweisung des Betriebspersonals. Selbstverständlich wird auch eine mögliche staatliche Förderung geprüft und die Antragsunterlagen für die Förderung erstellt.
Heidinger verfügt dafür über eigene Planung, eigenen Anlagenbau, eigenen Schaltschrankbau und erfahrene Montageteams. Diese durchgängige Betreuung sorgt für kurze Abstimmungswege und dafür, dass Energieeffizienz und Wärmerückgewinnung von Anfang an mitgeplant werden. Das senkt später die Betriebskosten.
Für den Kunden bleibt vor allem ein Ansprechpartner, der den Zusammenhang des gesamten Projekts kennt.
EN 388 does not tell you whether a glove works day to day
EN 388 is an important starting point when choosing safety gloves. On its own, it is not enough for everyday work.
A glove can meet the required protection class and still be unsuitable in practice. It may be too stiff for small components. It may get too warm over a long shift. It may lack the grip needed on oily surfaces. Or the available sizes may not fit the hands on the team.
Where people are reluctant to wear a glove, even the best cut protection class helps very little.
Protection and practical use therefore belong together. The right safety glove does more than guard against one specific hazard. It also suits the task, the surroundings and the people who work in it every day.
In technical procurement, the conversation often turns to specific products too early and to the actual requirement too late.
Yet quite different questions are settled at the outset: what should run better in the plant? What capacity is genuinely needed? Which existing equipment has to be integrated? What are the constraints on space, energy consumption and operation? And who coordinates the work with the manufacturer?
These questions arise for an extrusion line just as they do for a refrigeration plant or for the choice of safety gloves.
Our role at ES is to treat technical purchasing as a shared process. We establish the requirement together with the customer, agree the right solution with the respective manufacturer and stay available for the steps that follow.
Single-screw extruder for halogen-free thermoplastics
We are glad to represent Bernhard Ide GmbH & Co. KG and their extrusion technology.
The single-screw extruder shown here processes halogen-free thermoplastics at around 80 kg/h, runs efficiently and is designed to be integrated into an existing extrusion line. For use in the electrical industry, Ide configured the ME 75/5 × 25 D type for halogen-free thermoplastics.
A chiller can be correctly sized in isolation and still consume more energy than necessary within the wider system. Because it is not only the machine that decides. Pumps, ventilation, water circuits, buffers, consumers and controls all shape how efficiently and reliably a plant runs.
Typical problems arise when these areas are planned separately or controlled to different logics. Pumps then run longer than needed, temperatures do not match, or available waste heat goes unused.
Heidinger therefore looks not only at the refrigeration unit but at how the whole plant works together. The decisive question is not only which chiller is needed. Just as important: how must the entire system operate so that it matches what the business actually requires?
Depending on the plant, refrigerant, application, efficiency gain and company size, state funding may be available for such energy projects. Heidinger identifies suitable funding programmes, supports the application and takes the relevant conditions into account during the technical planning stage.
If you would like to find out which concept and which funding suit your operation, you can start the enquiry directly through ES. We clarify the starting position, coordinate the work with Heidinger and remain your personal contact throughout the project.
Stable cleanroom conditions are indispensable for precision and safety in manufacturing and analysis. The classes defined in ISO 14644-1 set the permissible particle concentration per cubic metre of air. At ISO 5 that is no more than 3,600 fine particles above 0.5 μm.
For this Heidinger offers a turnkey full service covering the entire cleanroom project: consulting and concept design, plant construction and integration, qualification through to acceptance, training and instruction, plus maintenance and after-sales support.
Energy efficiency matters in cleanrooms too. As experienced air-conditioning engineers, Heidinger's specialists deliver energetically optimised solutions, combined with innovative heat recovery systems, tailored heat pumps and intelligently coupled controls.
With the Heidinger Exobox, built in the company's own container yard at the Mühlacker site in Baden-Württemberg, the most important customer request can be met: integrating new refrigeration, air conditioning and heat pump systems far faster and more cheaply, including the complete pump periphery as well as control and regulation technology. Modular and tailored to each customer.
Housing the plant externally in the Exobox frees up space, and it solves most safety issues neatly, particularly where natural refrigerants are involved. For retrofitting existing buildings in particular, that is a genuine game changer.
Diese Extruder sind ein beeindruckendes Beispiel für die vielfältigen Lösungen der Bernhard Ide GmbH & Co. KG für Ihre Aufgabenstellungen aus der Extrusion.
Nässe, Öl und Fett gehören zum Einsatz – nicht in den Handschuh.
Der NIRO-S eco #1043 ist für Arbeitsbereiche konzipiert, in denen Feuchtigkeit, Öl und Fett zur täglichen Belastung werden: ein vollbeschichteter, wasserdichter Nitrilhandschuh mit Schutz bis zum Handgelenk.
Seine Vorteile: → flüssigkeitsdicht und ölabweisend → robust und abriebfest → geprüft nach EN 388: 4111X → erhältlich in den Größen 6–11
Geeignet für das Baugewerbe, den Garten- und Landschaftsbau, Handwerk, Lager und Logistik sowie Recycling.
Sie benötigen größere Bedarfsmengen? Sprechen Sie uns direkt an – wir erstellen Ihnen gerne ein individuelles Angebot.
Passende Arbeitsschutzhandschuhe finden – ohne lange Produktsuche, komplizierte Normenvergleiche und fehlende Produktinformationen?
Genau dafür ist unser neuer Onlineshop da.
Technische Einkäufer, Arbeitsschutz- und Produktionsverantwortliche finden dort über 60 Niro-S-Arbeitsschutzhandschuhe für unterschiedliche Anwendungen – von Montage- und Schnittschutzhandschuhen bis zu Kälte-, Hitze- und ESD-Schutz.
Im neuen Shop können Sie:
→ nach Einsatzbereich, Material, Größe, Norm und Schnittschutzklasse filtern → EN-388-Leistungswerte direkt vergleichen → technische Datenblätter am Produkt abrufen → Preise und Staffelpreise transparent einsehen → passende Schutzhandschuhe direkt online bestellen
Das Ergebnis: weniger Suchaufwand, eine fundiertere Produktauswahl und ein schnellerer Beschaffungsprozess.
Sie benötigen größere Mengen? Sprechen Sie uns direkt an – wir erstellen Ihnen gerne ein individuelles Angebot passend zu Ihrem Bedarf.
Und wenn Anwendung, Schutzklasse oder Tragekomfort noch nicht eindeutig sind, beraten wir Sie weiterhin persönlich.
Denn digital bestellen und persönlich betreut bleiben gehören bei ES Handels- und Servicegesellschaft zusammen.
New in our portfolio: refrigeration, air conditioning and heat pumps
Industrial refrigeration becomes complex when cooling, ventilation, electrics and controls are planned separately.
We are extending our portfolio: together with Heidinger we now support refrigeration, air conditioning and heat pump projects for industry and buildings. New to our range are chillers and heat pumps, process and ventilation technology, cleanrooms and precision measuring rooms, plus heat recovery and controls.
From analysis and planning through to commissioning and service: one coordinated solution, one fixed point of contact.
Industrial procurement costs time when services and contacts first have to be pieced together. With extrusion systems, industrial refrigeration and air conditioning, and occupational safety in particular, what is needed is a clear structure rather than an unwieldy product list. Missing orientation slows decisions and lengthens the route to the right solution.
That is why we built our site around actual needs. Technical buyers and project managers now find our three areas clearly grouped: extrusion systems, refrigeration and air conditioning, and safety gloves.
You do not get an anonymous catalogue from us, but a direct contact. We work out your requirements with you, identify suitable manufacturer solutions and accompany every step through to handover and the service that follows.
When the grip is missing, every box becomes a risk
Too stiff, too warm or too little hold: the wrong work glove makes safe gripping harder, strains the hands and often ends up not being worn at all.
The result: boxes slip more easily, work slows down, and protection does not work in practice the way it should.
The NIRO-S pro #1009 offers a flexible fit, good tactile sensitivity and a soft, water-repellent nitrile foam coating. That makes it suitable for warehousing, logistics, transport and assembly work.
We advise you personally on selecting the right protective gloves. Your staff can then test suitable models in their actual shift with our free sample box.
Anyone investigating multi-layer structures in material or process development knows the time sink: retooling, realigning and then getting the process to run stably again.
For trials like these we built two MEB 30 × 30D co-extruders as a synchronised tandem, an affordable way to add co-extruders flexibly to existing lines.
The machines move freely on castors and can be positioned precisely at the line. A motorised height adjustment adapts them quickly to the required extrusion height. Synchronisation and recipe management are built in, and process control runs on a stand-alone Siemens HMI. Even in tandem operation, the parameters of both machines can be stored and recalled reproducibly at any time.
The result: trial series and production runs are quicker to prepare, process parameters reproduce reliably and set-up times drop. This makes the machines suitable for research and development, material development and application-oriented trials in plastics extrusion, or as colour stripe extruders in production.
The most expensive glove is the one left unused on the shelf
Bought from a catalogue. Ordered in sizes M to XL. And put aside after two days, because the people on the shop floor will not wear it.
Too stiff. Too warm. No feel for small parts. The money is gone, and so is the protection, because a glove that is not worn protects nobody.
So we do it the other way round: you tell us where the work happens, whether assembly, warehousing, maintenance or painting. We put together a sample box for your case, with data sheets instead of slogans. Your people test the gloves during a real shift. Only then do we talk about quantities and prices.
Free of charge, without obligation and without returns. Because a procurement decision in occupational safety is not made at a desk, but at the workbench.
Anyone buying protective equipment knows the problem: production, warehousing, maintenance, painting, every department asks for its own model. The result is too many part numbers, too much stock and a procurement process that eats time for no reason.
The NIRO-S eco #1027 solves exactly that: a light all-rounder among assembly gloves that manages the balance between protection and tactile sensitivity.
The soft PU coating on the palm and fingertips grips whether conditions are dry, slightly damp or oily. The material is breathable and abrasion-resistant, which means less sweat and longer service life, and it allows fatigue-free work across a full shift.
From precise part handling in production to quick lifting in logistics: one model that works in the automotive industry, in mechanical engineering, in the warehouse and in the painting trade. Fewer variants, less procurement effort, the same protection.
